If there is a problem or error in the angle of view of the sandblasting machine crane Hook shot blasting machine The shot blasting surface is asymmetric. And the purpose of cleaning shall not be exceeded, which will endanger the quality and actual effect of shot blasting. Therefore, when using the shot blasting machine, the angle of view of the sand blasting machine is appropriate, which is applicable to ensure that Hook type shot blasting machine Shot blasting quality.

To make crane The hook shot blasting machine has good actual cleaning effect. What people must do is to pass the quality. The main parameters of the hook shot blasting machine should pass. Effective fit. Appropriate projectiles. In order to exceed these three points, it can have excellent actual cleaning effect.

The net weight of steel parts shall be within the range required by the hook type shot blasting machine. How can the hook type shot blasting machine not exceed the requirements? The clearance between the rubber wheel and the reducer hook of the hook type shot blasting machine should be effective, or it will endanger the normal operation of the hook type shot blasting machine. On the other hand, if there is a common failure of machinery and equipment, it should be handled immediately.

When the hook type shot blasting machine is actually operated, it shall be operated and selected according to the particle size distribution and appearance, and the walking speed of the equipment shall be adjusted and set. The hook type shot blasting machine controls the projectile flow of particles to obtain different ejection compressive strength and obtain the actual effect of different metal surface treatment.

The process treatment of the hook type shot blasting machine and the shot blasting equipment shall be solved according to the operation of the three main parameters and the difference of the surface to be audited. Select the size and appearance of particles; Traveling speed of hook shot blasting machine; Particle flow of hook shot blasting machine. The three main parameters cooperate with each other to achieve different actual effects and ensure the ideal surface roughness after shot blasting.

In the whole application process of the hook type shot blasting machine, there are some factors that may endanger the actual cleaning effect of the shot blasting machine: the throwing direction of the shot blasting machine is not accurate, and the adjustment of the hook type shot blasting machine in the timing frame; If the granularity is different, please select the granularity again; Particle adhesion or long-term application, particle removal and replacement; The grain supply is insufficient when new projectiles are added.

The hook type shot blasting machine manufacturer's workers have poor preconditions, so maintenance should be carried out as soon as possible. Workers who strictly follow the machine control procedures. Generally, check the tightness and promotion bucket of the transmission belt, V-belt and transmission chain in the transmission device, and sort out the damage of the protective plate in the room. If there are any obstacles, please remove them as soon as possible.

When the workers stop working every day, they must clean the machinery and equipment, and inspect each part for many times. If there is any damage, replace it quickly. Clean according to the rules and regulations in the instruction manual. Mechanical equipment shall be inspected quarterly.

To control and cherish the machine, employees must master the instructions. Those who do not master the functions and control technical specifications of the hook shot blasting machine shall not implement control.

When the shot blasting machine is incomplete, it is strictly prohibited to tidy the room on the street and road. Generally speaking, we should pay attention to the life round of the projectile, and do not make rapid improvement anytime, anywhere.

The leaves in the shot blasting machine shall be composed of 8 leaves with a weight error of no more than 5g. When replacing the leaves, two shall be replaced to reduce the impact caused by uneven values.

The general inspection will not change the elastic yellow buckle of the blade. If damaged, replace it as soon as possible. During the whole process of hook operation, all employees are prohibited from directly under the track in front of the street road sorting room.