Shot blasting machine Safety regulations for practical operation:

1. Understand and master the operation methods, performance parameters, performance parameters, technical protection expertise and safe operation procedures of mechanical equipment, constantly summarize the work experience of safe application, and constantly improve the operation and maintenance level of mechanical equipment. According to the simple operation of the shot blasting machine, just load the steel raw materials onto the equipment, press the start button, and after a short cycle of the system, the system software will automatically unload the solved raw materials. Basically, all stainless steel castings, gray castings, malleable steel castings, gray iron castings, etc. must be shot blasted. This is not only to eliminate the oxide skin and slag inclusion on the casting surface, but also an indispensable preparation process before the casting quality inspection. For example, large and medium-sized turbine casings must be shot blasted strictly before NDT to ensure the reliability of the test results.

2. Carry out daily maintenance of mechanical equipment in strict accordance with the scope of self inspection and self repair of the post to ensure that the mechanical equipment is in good living conditions for social workers. Basically, all stainless steel castings, gray castings, malleable steel castings, gray iron castings, etc. must be shot blasted. This is not only to eliminate the oxide skin and slag inclusion on the casting surface, but also an indispensable preparation process before the casting quality inspection. For example, large and medium-sized turbine casings must be shot blasted strictly before NDT to ensure the reliability of the test results.

3. Carefully and scientifically study the safety procedure flow of mechanical equipment, master the key links required for actual operation, and apply mechanical equipment in strict accordance with the safety procedure flow.

4. Insist on daily maintenance in accordance with the Technical Regulations for Safety Management Operation, and also insist on filling in the whole process records of mechanical equipment system software operation and work handover records every day. The deficiencies in mechanical equipment can be immediately notified to the successor. The continuous development trend of mechanical equipment operation related common faults are reflected in the research direction of operation data information records and work handover records, Immediately inform the maintenance unit that the equipment can only be used after maintenance, and the mechanical equipment is prohibited from faulty operation.

5. The team members shall do their own work in strict accordance with the scope of self inspection and self repair and the specifications for commercial insurance and overhaul of mechanical equipment, so as to avoid major safety accidents caused by small and common faults and immediately endanger all normal production and manufacturing.

6. Common faults of mechanical equipment. Self inspection and self-study work are beyond the scope of common faults, especially common faults of electrical equipment. Fill in the Transfer Form of Temporary Equipment Maintenance Notice immediately, and notify the mechanical equipment workshop to promote maintenance. It can be maintained and delivered for use after being signed.

7. At the time of shift handover, relevant laws and regulations before and after the operation must be received, and the social status, health and safety of the mechanical equipment must be cleaned up, and the problems within the self inspection and self repair scope of the shot blasting machine must be maintained.

The shot blasting machine is a common appearance sorting equipment in the foundry industry. Near the daily application, because the casting weight is very heavy, the consumption of the shot blasting machine is still large. Therefore, in the normal application process, the sorting strength of the shot blasting machine must be cultivated to complete the daily sorting operation, so that the life of the shot blasting machine is longer.

The operation post of shot blasting machine belongs to special post. If you want to be engaged in the operation of shot blasting machine, you must first pass the post training. In addition, after relevant training of shot blasting machine, you can only work near the training of shot blasting machine. There is a very good explanation for the daily maintenance of the shot blasting machine. Since the shot blasting machine is used every day, it is necessary to register the equipment management log of the shot blasting machine when using the shot blasting machine. The registration content of the log includes the daily maintenance time, maintenance items and weekly maintenance records of the equipment.

Before starting the shot blasting machine every day, the dust and garbage of the shot blasting machine shall be cleaned in time, and the shot blasting machine shall be lubricated and maintained in time.

If the daily maintenance of the shot blasting machine can be realized, not only the production capacity of the castings can be improved, but also the service life of the shot blasting machine can be extended, so that the shot blasting machine can improve the production capacity of the castings.