What grinding methods does the manufacturer of shot blasting machine have for shot blasting machine?

1. Filtering grinding method of shot blasting machine: when general rotary grinding equipment rotates at high speed, its chemical substances (compounds) will revolve around the grinding groove, and there is no relative speed between steel parts and grinding stones, so there is no relative speed difference, and the grinding effect will be greatly weakened. However, several grinding grooves are installed on the rotating transmission shaft of the rotary head disc to carry out the large planet rotation fitness exercise and give centripetal force. Due to centrifugal action, chemicals will rotate the inner hole around the groove wall, rotate the outer disk once, and the grinding groove will be greatly reversed once. Chemicals will move towards the indoor space of the grinding groove and the rotation direction of the top floor. Due to the working pressure and force of the centripetal force, liquidity is generated due to the working pressure and forced flow rate of the centripetal force, resulting in a difference in relative speed. The rotation speed is 140~180r/min, and the relative speed difference and centripetal force proportional to the rotation number will increase. Its grinding effect is 60 times that of rotary grinding equipment and 5-8 times that of vibration grinding machine. The filtering and grinding equipment has excellent grinding capacity and displays a lot of grinding information. It is mainly used for the lighting of precision mechanical equipment such as clock, electronic equipment and electrical equipment parts, especially for the grinding of small and medium-sized steel parts.

2. Water vortex grinding method: the water vortex grinding method is to install the barrel grinding groove installed on the vertical or horizontal surface in the grinding stone, water and grinding fluid, and then the grinding groove rotates, resulting in a rigid grinding layer due to centripetal force. The installation of steel parts in the grinding layer will result in the grinding effect caused by the relative speed difference with the grinding stone.

3、 Shot blasting machine Rotary grinding method: the rotary grinding method is to install steel parts, grinding stones, grinding fluid and water in the grinding groove to carry out the set rotary fitness exercise. Through the manufacturer of the shot blasting machine, a flow layer will be generated on the surface of the chemical substances and be illuminated. This grinding method is more suitable for grinding small and medium-sized parts and steel parts produced in batch.

4. Vibration grinding method of shot blasting cleaning machine: the vibration grinding method is to install steel parts, grinding stones, grinding fluid and water in the grinding groove for vibration, and use the relative speed difference between grinding stones and steel parts caused by vibration for grinding. The clean indoor space caused by rotary grinding equipment is removed, and 100% organic solvent in grinding tank is fully utilized. The labor efficiency of this grinding method is 3~5 times higher than that of rotary grinding equipment, and the steel parts produced and processed have no trace, deformation, etc. Generally selected milling method.