The shot blasting machine is suitable for shot blasting and rust removal of a large number of small and medium-sized steel parts. The steel parts can continue to run with the lifting chain or the stepper motor or select the excellent pusher catenary transportation work, so that the steel parts are in the termination state respectively in the dumping and shot blasting area, and the designated loading and unloading, handling and shot blasting process flow is maintained. The hook has a lifting weight of 50-2000kg, high production efficiency, reliable operation, and especially good actual removal effect on the surface and inner wall of complex steel parts such as engine oil pan cylinder head, motor housing, etc. It is an ideal choice for small cars, large tractors, diesel engines, motors, gate valves and other manufacturing industries. Catenary type Shot blasting machine According to the lifting chain moving method, it can be divided into continuous type, step-by-step type and cumulative type. According to the chain layout method, it can be divided into single travel arrangement, double travel arrangement and multi travel arrangement.

The continuous type is to suspend the steel parts on the chain hook and circulate systematically according to the shot blasting and derusting chamber. After entering the cleaning room, the steel parts will rotate under the driver of the rotating organization and move forward at the same time to accept the cleaning method.

Step by step is to sort the steel suspension hooks (usually 3 hooks and 1 group). The groups of hooks depend on the output power of the customer and the length of all clearing lines. The working sequence is feeding → waiting → shot blasting and rust removal (rotation) → waiting → cutting → waiting → feeding and then circulating the system.

Stacked type refers to the designated parking in the steel feeding area, and the fully loaded vehicle waits for feeding, which becomes the rear terminator in the material work. When the car runs to the shot blasting room, the car is waiting. In addition, a group of steel parts hoisted by vehicles in the shot blasting room have been shot blasted to remove rust, strengthening the solution. When the car leaves the shot blasting room after shot blasting in the shot blasting room, the waiting area terminator will automatically release, and the car will enter the shot blasting link; Another car is waiting; After the automobile steel parts are cleared (reinforced), start to the waiting area and wait for cutting. This keeps the system working.